SXGA resolution equals to 1280 x 1024 number of pixels. Compared to an XGA
display, there is 66% more display area. The increased screen resolution has
a direct impact on productivity, because now you can show more of your data,
images, spreadsheet with less scrolling.
Built-in TV tuner
and multiple video inputs
With the built-in TV tuner, the display doubles as a TV screen. Now you can
connect the LCD screen to a standard cable-TV coaxial cable or antenna. Not
only can you monitor your PC, you can view video sources from VCR, DVD, NTSC
TV or HD TV, and you can switch sources via front panel push buttons or the
included remote control.
25ms
response time
The
response time for LCD is the length
of time it takes to turn the pixels
on and off. 25ms is roughly 40 frames
per second.
When viewing fast moving images such
as those in computer animation and
games on older LCDs with 30ms and
higher response time, the images suffer
from blurring due to pixels not capable
of turning on and off fast enough.
With the RM-SX17T LCD, you get a fast,
25ms, pixel response time. It means
you'll notice little blurring during
fast-moving video images.
Edge light technology
Backlight systems for LCDs can be divided roughly into two types:
In the directly-under system a fluorescent lamp is positioned in a cage consisting
of a reflective plate and diffusive plate, so that light from the lamp is reflected
and scattered. Fluorescent lamp shapes in use include straight tubes, U-shaped
and W-shaped lamps. A light curtain and a diffuser are mounted over the lamps
to reduce unevenness in brightness. Compared with other methods, the directly
under system offers higher brightness.
Sidelight/edge light uses a straight CCFL lamp along one side of the LCD, or
two lamps on opposite sides of the LCD, or L-shaped lamps along the opposite
corners of the LCD. Edge light units use a reflector and light-guiding plate
to direct light from the fluorescent lamp to the screen to evenly disperse light
over the LCD. LCD panels using this backlighting technique are usually thinner
and have good average brightness. In addition, greater ease in changing the
lamp, and lower power consumption are also important features.
Versatile mounting options
RM-SX17T can be
rack mounted in standard 19"
equipment racks. The front bezel
is made of 0.25" thick, heavy
duty aluminum with mounting holes.
See
outline drawing for dimensions.
wall-, bench top-, swing arm-mounted
via rear panel's VESA mounting
holes.
Both 75mm and 100mm mount patterns
are supported.
Downloadable
product documentations are in Acrobat PDF file format. You need Acrobat
Reader to view/print the documentation.
Download it now if you don't have it!
holes.
Both 75mm and 100mm mount patterns
are supported.
